Product Description1. Standard connectivity, compatible with Zero/Zero W/Zero WH/2B/3B/3B+ 2. IPS screen, wide viewing angle, better display High definition in small size 3. 1x joystick, 3x pushbuttons, handy and useful 4. Comes with development resources and manual (examples for /Arduino/STM32) 5. Driver: ST7789 6. Interface: SPI 7. Display col..

Product Description1. IPS screen,1280 x 800 high resolution Capacitive touch control, supports up to ten-points touch 2. When works with Pi, supports Raspbian, Ubuntu, single touch, and driver free 3. When work as a computer monitor, supports Windows 10/8.1/8/7, ten-points touch, and driver free 4. Supports Banana Pi, Banana Pro, comes with Lubuntu..

Product Description1. 13.3inch IPS screen,1920×1080 high resolution 2. Toughened glass capacitive touch panel, 6H hardness 3. Supports popular mini PCs such as , BB Black, as well as general desktop computers 4. When works with , supports Raspbian, Ubuntu, WIN10 IOT, single touch, and driver free 5. hen work as a computer monitor, supports Windows ..

Product Description1. micro:bit edge connector, directly pluggable 2. Embedded driver ST7735S, supports 65K colors 3. Onboard SRAM 23LC1024, used as display cache, no more out of memory 4. SPI interface, takes up only a few IO pins 5. Backlight adjustment via PWM 6. Reserved solder pads for control interface, make it easy to connect with Arduino/Nu..

Product Description1. Standard connectivity, compatible with and direct-pluggable onto 2B/3B/3B+/Zero/Zero W 2. Optional interfaces: 4-wire SPI, 3-wire SPI, I2C, configured via onboard resistor 3. 1x joystick (5-position), 3x pushbuttons, handy and useful 4. Comes with development resources and manual (examples for /Arduino/STM32) 5. Driver: SH..

Product DescriptionDescription: Large capacity electrolytic filter capacitor + high frequency monolithic capacitor filter, so that the output DC more clean and stable, with power indicator, easy to observe the state.Input voltage: AC dual 5-18V, DC dual 7-24vOutput voltage: ..

Product Description1. SPI interface, requires minimum GPIO for controlling 2. Comes with development resources and manual (examples for /Arduino/STM32) 7. Driver: ST7735S 8. Resolution: 160×128 9. Color display: RGB, 65k colors 10. Operating voltage: 3.3 v 11. Backlight: LED Specification: Package Weight One Package Weight 0.07kgs / 0.15l..

Product DescriptionCharacteristic: Receiving frequency: L1 [1575.42MHz]Follow channel: 56Support DGPS [WAAS, EGNOS and MSAS]Independent location: <10 metersWAAS: <5 metersDrift: <0.02m / sTime accuracy: 1usCoordinate system: WGS-84Maximum altitude: 18,000 metersMaximum acceleration 500m / sAccelerator: <4gFollow sensitivity: -159dB..

Product Description1. 128×128 high resolution, 65K colors, clearly displays colorful images 2. Supports 4-wire SPI OR 3-wire SPI interface, configured via onboard resistor 3. Comes with development resources and manual (examples for /Arduino/STM32) 7. Driver: SSD1351 8. Interface: 4-wire SPI, 3-wire SPI 9. Display color: RGB, 65K colors 10. Resolu..

Product DescriptionFeatures: - Single touch,using the principle of capacitance touch .The default function is switch,dimming,with brightness memories LED touch dimming.It will light slowly when turn on the lights,and become dark slowly when turn off,which effectively avoid the stimulation to eyes.- The lamp brightness can be adjusted by requir..

Product DescriptionFeatures: - support 5 V / 3.3 V voltage input- on-board signal output, the output signal is effective instruction low level and at the same time, the output signal lights out can be directly and single-chip microcomputer IO connection.- signal detection sensitivity can adjust.-reserve all the way more circuits (P3 voltage dr..

Product DescriptionDescription: NE555 circuit and peripheral components constitute a multi-resonator. The output waveform is rectangular wave. By adjusting the duty cycle of the output rectangular wave, square wave can be formed. Further more, the output waveforms can be processed by integral transform circuit. The output waveforms include squ..

Product DescriptionFeatures: 1.The flame sensor is most sensitive to flame,and it will also respond to ordinary light,generally used in fire alarm and other purposes.2.A small panel output interface can be directly connected with the microcontroller IO port.3.The sensor should be kept a certain distance from the flame,so as not to damage the s..

Product DescriptionDescription: Board size: 60*60*130mmFinished size: 70*70*200mmBoard material: single-sided 1.4mm FR-4 sheetSupply voltage: 3.5V-5VNumber of LEDs: 37pcs 3mm LED, 4pcs 5mm LEDLED color: ColorfulSupport memory card, u diskComes with 3W speaker, can be connected to an external speakerSupport mobile phone connectionThe LED will f..

Product DescriptionDescription:This small handheld POV spining kit designed as a white rounded triangle shape,that makes the weight of the three sides maintain balance. combined to the high-speed 608 rotation bearing,it can rotate for more than one minute and won't shake to the side.you can put it on the desktop or between the fingertips when r..